11 applications, 13 QuickIN accessories, 1 tool.

 

  • Drilling in metal with SKE drill chuck (6)
  • Core drilling in steel with hole saw adapter (13)
  • Drilling holes in sheet metal with hole saw adapter (13)
  • Tapping with adapter and collets (1, 2, 3, 4)
  • Drilling in confined spaces with angled head (12)
  • Drilling in wood with drill chuck (7, 8)
  • Drilling in masonry (7)
  • Driving metric screws with socket adapter (9) 
  • Screwdriving self-drilling seal screws with depth stop (5)
  • Screwdriving in confined spaces with eccentric output (11)
  • Screwdriving application in wood with bit holder (10)

FEIN VARIO accessories - THE REVOLUTION FOR IMPACT WRENCHES.

  • HIGHER PRODUCTIVITY – LOWER COSTS.Tapping, recutting or cleaning an M30 thread with an impact wrench/driver is around 3 times faster than manual recutting or cleaning with a tap wrench (25 to 80 seconds).
  • NO NEED TO WORRY ABOUT MOBILE REWORK. The FEIN VARIO accessories turn an impact wrench/driver into a powerful tapper, thereby covering an additional application. You no longer need to rework damaged threads or defective components on stationary tools or by hand.
  • WORK WITH JUST 1 TOOL. Twist drill, countersink and tap up to M18 with the ASCD 18-300 W2 AS and recut and clean threads of up to M30 with the ASCD 18-1000 W34 AS without the need for any additional special tools.
  • LESS RISK OF INJURY. Very safe to use because there is no kick-back on your hands or arms. A VARIO consumable gripped with positive engagement also ensures a reliable hold even at torque levels in excess of 1000 Nm.
Tapping adapter
Tapping adapter

Reliable thread drill hold on the square, preventing slipping. Compatible with all FEIN collets and all FEIN cordless drill/drivers with QuickIN/QuickIN MAX interface.

To the product
To the product

FEIN collets

Collets
Collets

for collet chucks and floating collet chucks and tapping adapters.

Ø 2.8 mm , Square 2.1 mm
To the product
To the product
Collets
Collets

for collet chucks and floating collet chucks and tapping adapters.

Ø 3.5 mm , Square 2.7 mm
To the product
To the product
Collets
Collets

for collet chucks and floating collet chucks and tapping adapters.

Ø 4.5 mm , Square 3.4 mm
To the product
To the product
Collets
Collets

for collet chucks and floating collet chucks and tapping adapters.

Ø 6 mm , Square 4.9 mm
To the product
To the product
Collets
Collets

for collet chucks and floating collet chucks and tapping adapters.

Ø 7 mm , Square 5.5 mm
To the product
To the product
Collets
Collets

for collet chucks and floating collet chucks and tapping adapters.

Ø 8 mm , Square 6.2 mm
To the product
To the product
Collets
Collets

for collet chucks and floating collet chucks and tapping adapters.

Ø 9 mm , Square 7 mm
To the product
To the product
Collets
Collets

for collet chucks and floating collet chucks and tapping adapters.

Ø 10 mm , Square 8 mm
To the product
To the product
Hole saw adapter
Hole saw adapter

To drill large holes in metal. Suitable for all FEIN carbide hole saws and core drills with QuickIN PLUS holder. Perfectly suited to diameters of up to 40 mm. Supplied with centring bit, without hole saw. Compatible with all FEIN cordless drill/drivers with QuickIN / QuickIN MAX interface.

To the product
To the product

Carbide hole saws and carbide core drill bits with QuickIN Plus holder

Centring drill bit
Centring drill bit
To the product
To the product
Extension
Extension

For use on confined, deep or layered surfaces. QuickIN-PLUS holder, length 100 mm, including adapter for centring drill bit.

To the product
To the product

FEIN drill/drivers in action