RSG EX 1500 A
Pipe milling cutter for pipes from dia. 10 [250] in[mm] to dia. 59 [1,500] in[mm]
RSG EX 1500 A
Pipe milling cutter for pipes from dia. 10 [250] in[mm] to dia. 59 [1,500] in[mm]
Powerful explosion-protected electrical pipe-milling machine with a feed rate of 1-9/16 [40] in/min[mm/min] for pipes up to dia. 59 [1,500] in[mm].
Product number: 7 360 14 61 00 0
Details
- Sawing of steel and gray cast iron oil, gas, and water pipes up to a wall thickness of 1-3/4[45] in[mm].
- Milling of steel and gray cast iron oil, gas, and water pipes up to a wall thickness of 1-3/16 [30] in[mm] (with 2x circulation).
- Explosion- and moisture-proof 3-phase motor with explosion-protected auxiliary switch.
- Use in extreme climatic conditions possible (104[+40] °F[°C] to -4[-20] °F[°C]).
- The optionally available guide chain guarantees straight cuts without offset.
- Simple setup/shortened side plates ensure less space is required around the machine. In addition, weight optimization means that only two persons are required to set up the machine.
- Horizontal and vertical dividing without extra investment.
- The feed movement can be switched on and off.
- Tool works independently.
Technical data
Current/Voltage
400 V
Power output
1,500 W
Frequency
50 Hz
Motor no-load speed
2,860
Tool no-load speed
35
Advance
1.57 [40] mm in[mm] /min
protection class
I
Cable with plug
131.2 [40] ft[m]
Weight
176.37 [80] lbs[kg]
Downloads
Price includes
- 1 shipping container
- 4 handles
- 1 chain tensioner
- 1 metal tool case
- 5 riving knives, spark free
- 40 bolts
- 80 circlips
- 10 chain segments (length 1-1/4 [31.75] in[mm])
- 1 wrench set
- 1 switchgear with motor protection switch
- 1 CEE clutch
- 2 transport belts
- 3 chain spacers
Application
Product feature
- Electric drive
- ATEX components
- Feed cut-off
- Cutting depth scale
- Feed and return
- Additional guide chain