Software
PC Software AccuTec ParameterControl for parameterization of the AccuTec drivers. To connect the machine to the PC, the programming adapter (9 26 04 163 02 0) with the corresponding USB cable is also required. We recommend that you regularly update the firmware on your screwdrivers to the latest version.
Use ParameterControl V4 for machines which have a serial number starting from 2019-10.xxx.
PC-Software ParameterControl V4 (last update: 17.07.2024)
Software AccuTec ParameterControl V4 contains the following components:
- Software ParameterControl V4.0.0.13
- Firmware V04.01.18 – ASW18-X PC / ASM18-X PC
Note: After an exchange of the electronics (installation Unitronic) on an ASW 18-X with serial number before 2019.11.xxx, it can only be programmed with ParameterControl V4 software.
Download:
Use ParameterControl V3 for machines which have a serial number up to 2019-08.xxx.
PC-Software ParameterControl V3 (last update: 05.12.2017)
Software AccuTec ParameterControl V3 contains the following components:
- Software ParameterControl V3.0.0.15
- Firmware: V03.01.24 – ASW18-X PC / V03.01.17 – ASM14-X PC / V03.01.15 – ASW14-X PC / V03.01.18 – ASW / ASM 14-X
Improvements over previous software:
- Compatibility with all AccuTec models
- An acoustic and optical signal is now sent in case of machine and screw joint errors
Download: PC-Software ParameterControl V3
Firmware-Paket AccuTec V3 (last update: 05.12.2017)
Contains the latest firmware for all AccuTec machines with a production date before 09/2019. The ParameterControl V3 software must be installed for use. The AccuTec V3 firmware package contains the following components:
- Firmware: V03.01.24 – ASW18-X PC / V03.01.17 – ASM14-X PC / V03.01.15 – ASW14-X PC / V03.01.18 – ASW / ASM 14-X
Improvements over previous software:
- Compatibility with all AccuTec models
- An acoustic and optical signal is now sent in case of machine and screw joint errors
By placing this package in the appropriate directory, the firmware is updated. Thus, a software update is not necessary. By default the firmware directory can be found under the following path: C:\Program Files (x86)\AccuTec\firmware
Download: Firmware-package AccuTec V3
Use ParameterControl V4 for machines which have a serial number starting from 2019-10.xxx.
PC-Software ParameterControl V4 (last update: 17.07.2024)
Software AccuTec ParameterControl V4 contains the following components:
- Software ParameterControl V4.0.0.13
- Firmware V04.01.18 – ASW18-X PC / ASM18-X PC
Note: After an exchange of the electronics (installation Unitronic) on an ASW 18-X with serial number before 2019.11.xxx, it can only be programmed with ParameterControl V4 software.
Download:
Use ParameterControl V3 for machines which have a serial number up to 2019-08.xxx.
PC-Software ParameterControl V3 (last update: 05.12.2017)
Software AccuTec ParameterControl V3 contains the following components:
- Software ParameterControl V3.0.0.15
- Firmware: V03.01.24 – ASW18-X PC / V03.01.17 – ASM14-X PC / V03.01.15 – ASW14-X PC / V03.01.18 – ASW / ASM 14-X
Improvements over previous software:
- Compatibility with all AccuTec models
- An acoustic and optical signal is now sent in case of machine and screw joint errors
Download: PC-Software ParameterControl V3
Firmware-Paket AccuTec V3 (last update: 05.12.2017)
Contains the latest firmware for all AccuTec machines with a production date before 09/2019. The ParameterControl V3 software must be installed for use. The AccuTec V3 firmware package contains the following components:
- Firmware: V03.01.24 – ASW18-X PC / V03.01.17 – ASM14-X PC / V03.01.15 – ASW14-X PC / V03.01.18 – ASW / ASM 14-X
Improvements over previous software:
- Compatibility with all AccuTec models
- An acoustic and optical signal is now sent in case of machine and screw joint errors
By placing this package in the appropriate directory, the firmware is updated. Thus, a software update is not necessary. By default the firmware directory can be found under the following path: C:\Program Files (x86)\AccuTec\firmware
Download: Firmware-package AccuTec V3
Homologations
ASM_18-3_PC / ASM_18-8_PC / ASM_18-12_PC
ASW_18-6_PC / ASW_18-12_PC / ASW_18-18_PC
ASW_18-30_PC / ASW_18-45_PC / ASW_18-60_PC
If you require further information or 3D data, 2D data or STEP files, please contact your FEIN contact person.