• HIGHER PRODUCTIVITY – LOWER COSTS.Tapping, recutting or cleaning an M30 thread with an impact wrench/driver is around 3 times faster than manual recutting or cleaning with a tap wrench (25 to 80 seconds).
  • NO NEED TO WORRY ABOUT MOBILE REWORK. The FEIN VARIO accessories turn an impact wrench/driver into a powerful tapper, thereby covering an additional application. You no longer need to rework damaged threads or defective components on stationary tools or by hand.
  • WORK WITH JUST 1 TOOL. Twist drill, countersink and tap up to M18 with the ASCD 18-300 W2 AS and recut and clean threads of up to M30 with the ASCD 18-1000 W34 AS without the need for any additional special tools.
  • LESS RISK OF INJURY. Very safe to use because there is no kick-back on your hands or arms. A VARIO consumable gripped with positive engagement also ensures a reliable hold even at torque levels in excess of 1000 Nm.

VARIO ADAPTER

New
VARIO 1/2” adapter
VARIO 1/2” adapter
VARIO 1/2” adapter

Impact wrench/driver-compatible VARIO adapter turns the impact wrench/driver into a tapper, thereby…

Accessory interface 1/2 in Outer square ISO 1174-2 E/F 12.5 , L 53.2 mm , Material Full metal , Tool Holder VARIO Bit Shaft , Drill Ø steel twist drill 12 mm , Tapping M 30 , Weight 0.19 kg
New
VARIO 3/4” adapter
VARIO 3/4” adapter
VARIO 3/4” adapter

Impact wrench/driver-compatible VARIO adapter turns the impact wrench/driver into a tapper, thereby…

Accessory interface 3/4" Outer square ISO 1174-2 F 20 , L 64.2 mm , Material Full metal , Tool Holder VARIO Bit Shaft , Drill Ø steel twist drill 12 mm , Tapping M 30 , Weight 0.4 kg
New
VARIO QuickIN adapter
VARIO QuickIN adapter
VARIO QuickIN adapter

Use the VARIO QuickIN adapter to easily change from the QuickIN interface to the VARIO interface and use…

Accessory interface QuickIN , L 61.2 mm , Drill Ø steel twist drill 12 mm , Tapping M 14 , Weight 0.18 kg

FEIN VARIO accessories