RSG 1500 A

Pipe milling cutter for pipes from dia. 10 [250] in[mm] to dia. 59 [1,500] in[mm]


RSG 1500 A

Pipe milling cutter for pipes from dia. 10 [250] in[mm] to dia. 59 [1,500] in[mm]

Powerful electrical pipe-milling machine with a feed rate of 1-9/16 [40] in/min[mm/min] for pipes up to dia. 59 [1,500] in[mm].

Product number: 7 360 16 61 00 0

RSG 1500 A

Add to Shopping Cart

Details

  • Sawing of steel and gray cast iron oil, gas, and water pipes up to a wall thickness of 1-3/4[45] in[mm].
  • Milling of steel and gray cast iron oil, gas, and water pipes up to a wall thickness of 1-3/16 [30] in[mm] (with 2x circulation).
  • Use in extreme climatic conditions possible (140[+60] °F[°C] to -22[-30] °F[°C]).
  • The optionally available guide chain guarantees straight cuts without offset.
  • Simple setup/shortened side plates ensure less space is required around the machine. In addition, weight optimization means that only two persons are required to set up the machine.
  • Horizontal and vertical dividing without extra investment.
  • The feed movement can be switched on and off.
  • Tool works independently.

Technical data

Current/Voltage
400 V
Power output
1,500 W
Frequency
50 Hz
Advance
1.57 [40] mm in[mm] /min
Cable with plug
32.8 [10] ft[m]
Weight
163.14 [74] lbs[kg]

Downloads

Manual instruction

PDF 5,06 MB

Download Manual instruction (5,06 MB)

Price includes

  • 1 shipping container
  • 4 handles
  • 1 chain tensioner
  • 1 metal tool case
  • 1 crank handle
  • 10 riving knives
  • 20 bolts
  • 40 circlips
  • 10 chain segments (length 1-1/4 [31.75] in[mm])
  • 1 wrench set
  • 1 switchgear with motor protection switch
  • 1 CEE clutch
  • 2 transport belts
  • 4 chain spacers

Application

Pipe cutting up to dia. 59 [1,500] in[mm]
well suitable
Temperature range permanently below 0 °C
well suitable
Sawing of steel pipes with a wall thickness up to 1-3/4 [45] in[mm]
well suitable
Sawing of cast pipes up to a wall thickness of 7/8 [22] in[mm]
well suitable
Cutting of steel pipes up to a wall thickness of 1-3/16 [30] in[mm]
well suitable
Cutting of cast pipes with a wall thickness up to 9-16 [15] in[mm]
well suitable
Vertical cuts
suitable
suitable
well suitable

Product feature

  • Electric drive
  • Feed cut-off
  • Cutting depth scale
  • Feed and return
  • Additional guide chain

Similar products

RSG EX 1500 A

Pipe milling cutter for pipes from dia. 10 [250] in[mm] to dia. 59 [1,500] in[mm]

RSG EX 1500 A