The FEIN magnetic drilling system.


With more than 25 years of continuous development, FEIN’s magnetic drilling technology has achieved a peak of excellence. FEIN’s 2011 acquisition of Jancy Engineering raised the bar even higher, now offering the well-known Slugger trademarked system of portable magnetic drills and annular cutters.

Now you’re leaving the FEIN website and entering the Slugger website!

Return to overview
Magnetic base drilling - KBH 25-2 U

Hand-held 2-speed metal core drilling system for universal core and twist bit drilling.

  • Work up to 6 times faster due to innovative drilling technology: Pilot hole drilled to a depth of 3/16 in [5 mm] at 1,600 rpm, followed by disengagement of the pilot bit and automatic speed change to 520 rpm for optimal cutting speed for carbide core bits. The carbide core bit finishes drilling the desired hole diameter with minimum effort and specially developed core bit cutting geometry.
  • Usable on all common metals and surfaces by adjusting the speed to the particular job.
  • Very safe operation due to the torque slip clutch. Protects the user when overloaded by separation of the driver and driven sides.
  • Mechanical 2-speed gearbox with speeds from 0-1,600 rpm for efficient twist drilling and forward / reverse rotation for thread tapping up to 1/2 in [M12].
  • ** Torque slip clutch.
  • Reversible.
  • FEIN high-performance motor with excellent speed stability.
  • Electronic start.
  • Speed selection
  • Speed-controlled tacho electronics.
  • Variable electronic speed control.
  • Torsion-free, barrel-type motor housing.
  • Carbide core bits with optimized service life.
  • Self-start lock.
  • Wide range of accessories.
comparebookmark

Price includes

  • 1 metal core drill KBH 25-2 U
  • 1 pilot bit
  • 1 handle
  • 1 cutting spray
  • 1 quick-action chuck 1/8 - 5/8 in dia.
show all

Technical data

  • Power consumption1,200 Watts
  • Power output680 Watts
  • 1st gear0-520 rpm
  • 2nd gear0-1,600 rpm
  • Full load torque442 in/lbs
Show all technical attributes
Page
Carbide core bits with QuickIN-PLUS mount
Maximum service life, thanks to carbide tipping. Outstanding cutting performance in all common metals.
Metric dimensions, drilling depth 3/4 in (20 mm), hole dia. up to 1 in (25 mm) in steel, up to 1-3/16 in (30 mm) in aluminum.

Order No. 6 31 30 014 01 0
Carbide core bits with QuickIN-PLUS mount
Maximum service life, thanks to carbide tipping. Outstanding cutting performance in all common metals.
Inch dimensions, drilling depth 3/4 in (20 mm).

Order No. 6 31 30 200 01 0
Loading
Page