The FEIN magnetic drilling system.

With more than 25 years of continuous development, FEIN’s magnetic drilling technology has achieved a peak of excellence. FEIN’s 2011 acquisition of Jancy Engineering raised the bar even higher, now offering the well-known Slugger trademarked system of portable magnetic drills and annular cutters.

Now you’re leaving the FEIN website and entering the Slugger website!

Return to overview
Drilling and core drilling metal - DSceu 638Drilling and core drilling metal - DSceu 638
Drilling and core drilling metal - DSceu 638
Drilling and core drilling metal - DSceu 638

Hammer drill with impact deactivation for universal installation work.

  • High torque motor with excellent speed stability for steady drilling progress.
  • Mechanical two-speed gearbox with optimum speed adjustment for a wide range of uses.
  • Impact deactivation and forward/reverse for cost-effective work in stone, concrete, masonry, wood, and metal.
  • Variable electronic speed adjustment.
  • Robust barrel-type motor housing.
  • FEIN kinetic handle.
  • Small corner width.
  • Superb service life.
  • Collar for use with drill jig.

Technical data

  • Power output230 Watts
  • Full load speed0–700/0–1,800 rpm
  • No load speed0–1,100/0–2,800 rpm
  • Blows per minute under load0–14,000/0–36,000 rpm
  • Cable with plug16 ft
Show all technical attributes
Tool Case
Plastic, interior dimensions: 18-1/2 x 12-1/4 x 5-1/4 in [470 x 275 x 116 mm]

Order No. 3 39 01 118 01 0
3-jaw drill chuck
Drill chuck holder 1/2 in -20 UNF

Order No. 6 32 03 041 01 4
Quick-action keyless chuck
Drill chuck holder 1/2 in -20 UNF
Form R tip

1/16 - 1/2 In

1.19 lbs

Order No. 6 32 05 033 01 0