The FEIN magnetic drilling system.
With more than 25 years of continuous development, FEIN’s magnetic drilling technology has achieved a peak of excellence. FEIN’s 2011 acquisition of Jancy Engineering raised the bar even higher, now offering the well-known Slugger trademarked system of portable magnetic drills and annular cutters.
Now you’re leaving the FEIN website and entering the Slugger website!
Turbo II Set
Wet/Dry Dust Extractor
High performance wet and dry vacuum cleaner with power tool connection for workshop and installation use.
- High performance turbine for 151 cfm (71 l/s) flow rate and 98.4" of water lift (245 mbar vacuum).
- Low volume of 66 dB (A).
- large range due to 19 ft power cord and 13 ft vacuum hose.
- Large wheels rotate 360° for optimal maneuverability, even in tight conditions.
- Tool coupling with suction control for easy control of suction power.
- Autostart outlet with power-on delay to prevent current spikes.
- Practical storage area with rim.
- Approval for dust class L.
- 1 tool coupling with suction control
- 1 suction hose 13 ft [4 m], 1-3/8 in [35 mm] dia.
- 1 filter bag
- 2 metal extension tubes
- 1 combination tool with interchangeable inserts
- 1 crevice tool
- 1 dusting brush
- 1 elbow
- Maximum power input1 380 Watts
- Power consumption1,100 Watts
- Suction capacity151 cfm
- Static water lift98.4 in
- Capacity8.4 gal
Cellulose, nano-coated, preferably use with dry dust
PES, nano-coated, for wet and dry use
HEPA, special filter, 0.3 micron for hazardous dust
replaces the fleece filter bag
Fits 35 mm dia. suction hose
2-piece, chrome plated metal
2 metal extension tubes, 1 combination tool with interchangeable inserts, 1 crevice nozzle, 1 dusting brush, 1 elbow
Convertible, with stainless steel sliding surface and bristles on all sides, suitable for smooth floors and fiber floor coverings.
For wet and dry work with interchangeable rubber blades and brush strips
With brush strips
rotates, natural bristles, 2-3/4 x 1-3/4 in [70 x 45 mm] bristle edging
Natural bristles, 4-3/4 x 1-3/4 in [120 x 45 mm] bristle edging
27 mm dia., fits power tool
1-1/2 in [38 mm] dia., fits power tool
For attaching cable to suction hose, fits suction hose 1-1/16 - 1-3/8 in [27-35 mm] dia.