Conventional twist drilling compared to core drilling

Twist drilling
  • centre
  • pre-drilling
  • tool change
  • Finish drilling
Get to the core of the matter faster. Cuts working time by up to 40%.
Core drilling
  • Core drilling does all this in a single process.
Twist drilling
  • centre
  • pre-drilling
  • tool change
  • Finish drilling
Get to the core of the matter faster. Cuts working time by up to 40%.
Core drilling
  • Core drilling does all this in a single process.
Twist drilling
  • centre
  • pre-drilling
  • tool change
  • Finish drilling
Get to the core of the matter faster. Cuts working time by up to 40%.
Core drilling
  • Core drilling does all this in a single process.
Twist drilling
  • centre
  • pre-drilling
  • tool change
  • Finish drilling
Get to the core of the matter faster. Cuts working time by up to 40%.
Core drilling
  • Core drilling does all this in a single process.
Twist drilling
  • centre
  • pre-drilling
  • tool change
  • Finish drilling
Get to the core of the matter faster. Cuts working time by up to 40%.
Core drilling
  • Core drilling does all this in a single process.

Core drilling can be used for a wide range of tasks, from drilling in steel girders to overlapping holes, drilling in multi-layer materials and offset stop-drilling.

  • Drilling in flat steel
  • Remove the bolts
  • Multi-layer drilling
  • Overlapping holes
  • Offset drilling
  • Drilling in steel beams
  • Drilling in metal pipes
  • Drilling in ripple plate
  • Drilling in stainless steel

FEIN core drills range

  • All products
  • Mobile
    Flexibility for core drilling in any material and surface
  • Economical
    Basic functionality for core drilling
  • Compact
    Optimised size for use in confined or hard-to-reach places
  • Universal
    Versatility thanks to maximum functionality
  • Automatic
    Maximum efficiency thanks to fully automatic drill feed
NEW
Metal core drilling - KBH 25 S KBH 25 S Hand-guided metal core drilling system up to 25 mm CompareNote
NEW
Metal core drilling - KBH 25-2 U KBH 25-2 U Two-speed metal drilling system up to 25 mm CompareNote
Metal core drilling - KBB 30 KBB 30 Metal core drilling unit up to 30 mm CompareNote
Metal core drilling - KBB 38 KBB 38 Metal core drilling unit up to 38 mm CompareNote
Metal core drilling - KBB 60 KBB 60 Metal core drilling unit up to 60 mm CompareNote
Metal core drilling - KBB 40 KBB 40 Metal core drilling unit up to 40 mm CompareNote
NEW
Metal core drilling - KBU 35 QW KBU 35 QW Universal magnetic core drill for up to 35 mm CompareNote
NEW
Metal core drilling - KBU 35-2 QW KBU 35-2 QW Universal magnetic core drill for up to 35 mm CompareNote
NEW
Metal core drilling - KBU 35 MQW KBU 35 MQW Universal magnetic core drill for up to 35 mm CompareNote
Metal core drilling - KBM 50 Q KBM 50 Q Metal core drilling unit up to 50 mm CompareNote
Metal core drilling - KBM 50 U KBM 50 U Metal core drilling unit up to 50 mm CompareNote
Metal core drilling - KBM 65 U KBM 65 U Metal core drilling unit up to 65 mm CompareNote
Metal core drilling - KBM 80 U KBM 80 U Metal core drilling unit up to 80 mm CompareNote
Metal core drilling - KBM 50 auto KBM 50 auto Metal core drilling unit up to 50 mm CompareNote
Metal core drilling - KBM 80 auto KBM 80 auto Metal core drilling unit up to 80 mm CompareNote
 
NEW
Metal core drilling - KBH 25 S KBH 25 S Hand-guided metal core drilling system up to 25 mm CompareNote
NEW
Metal core drilling - KBH 25-2 U KBH 25-2 U Two-speed metal drilling system up to 25 mm CompareNote
 
Metal core drilling - KBB 30 KBB 30 Metal core drilling unit up to 30 mm CompareNote
Metal core drilling - KBB 38 KBB 38 Metal core drilling unit up to 38 mm CompareNote
Metal core drilling - KBB 60 KBB 60 Metal core drilling unit up to 60 mm CompareNote
 
Metal core drilling - KBB 40 KBB 40 Metal core drilling unit up to 40 mm CompareNote
 
NEW
Metal core drilling - KBU 35 QW KBU 35 QW Universal magnetic core drill for up to 35 mm CompareNote
NEW
Metal core drilling - KBU 35-2 QW KBU 35-2 QW Universal magnetic core drill for up to 35 mm CompareNote
NEW
Metal core drilling - KBU 35 MQW KBU 35 MQW Universal magnetic core drill for up to 35 mm CompareNote
Metal core drilling - KBM 50 Q KBM 50 Q Metal core drilling unit up to 50 mm CompareNote
Metal core drilling - KBM 50 U KBM 50 U Metal core drilling unit up to 50 mm CompareNote
Metal core drilling - KBM 65 U KBM 65 U Metal core drilling unit up to 65 mm CompareNote
Metal core drilling - KBM 80 U KBM 80 U Metal core drilling unit up to 80 mm CompareNote
 
Metal core drilling - KBM 50 auto KBM 50 auto Metal core drilling unit up to 50 mm CompareNote
Metal core drilling - KBM 80 auto KBM 80 auto Metal core drilling unit up to 80 mm CompareNote
 

The FEIN core drills range includes the right tool for every job. From hand-guided to stationary core drilling, FEIN covers every metal drilling application with diameters of 0.5 mm to 80 mm and cutting depths of up to 75 mm. From the flexible hand-guided metal core drilling system with fast cutting speed to the magnetic core drills in the Economical, Compact, Universal and Automatic performance classes. We’ve got the right solution for every application, thanks to our extensive range of accessories.

  • Different performance classes to cover every application.
  • Maximum versatility and flexibility.
  • Outstanding service life and reliability.
  • First-class materials and excellent workmanship.

FEIN’s extensive range of core drill bits
will have the right accessory for your job

  • HM Ultra
    HM Ultra

    Durable and powerful in all metals.

  • HSS Dura
    HSS Dura

    TiN coating, perfect for steel and stainless steel.

  • HSS Nova
    HSS Nova

    Resistant to shock and impact in steel construction and on the construction site.

Ask for a free demo now!

Send query Fields marked with * are required fields