Back to overview
Magnetic base drilling - KBH 25 S

Hand-held, single speed, metal core-drilling system for fast, flexible core bit use.

  • Work up to 6 times faster due to innovative drilling technology: Pilot hole drilled to a depth of 3/16 in [5 mm] at 1,600 rpm, followed by disengagement of the pilot bit and automatic speed change to 520 rpm for optimal cutting speed for carbide core bits. The carbide core bit finishes drilling the desired hole diameter with minimum effort and specially developed core bit cutting geometry.
  • Usable on all common metals and surfaces by adjusting the speed to the particular job.
  • Very safe operation due to the torque slip clutch. Protects the user when overloaded by separation of the driver and driven sides.
  • ** Torque slip clutch.
  • Reversible.
  • FEIN high-performance motor with excellent speed stability.
  • Electronic start.
  • Variable electronic speed control.
  • Speed-controlled tacho electronics.
  • Torsion-free, barrel-type motor housing.
  • Carbide core bits with optimized service life.
  • Self-start lock.
  • Wide range of accessories.
CompareNote

Technical data

  • Power consumption1,200 Watts
  • Power output680 Watts
  • Full load speed0-520 rpm
  • Full load torque442 in/lbs
  • No load torque442** in/lbs
Show all technical attributes
Page
Carbide core bits with QuickIN-PLUS mount
Maximum service life, thanks to carbide tipping. Outstanding cutting performance in all common metals.
Metric dimensions, drilling depth 3/4 in (20 mm), hole dia. up to 1 in (25 mm) in steel, up to 1-3/16 in (30 mm) in aluminum.

Order no. 6 31 30 014 01 0
Carbide core bits with QuickIN-PLUS mount
Maximum service life, thanks to carbide tipping. Outstanding cutting performance in all common metals.
Inch dimensions, drilling depth 3/4 in (20 mm).

Order no. 6 31 30 200 01 0
Loading
Page